- Comp-phys-alps-users - lists.phys.ethz.ch

density measurement in qmc with sse agrithm
by 郭怀明 16 Jan '17

16 Jan '17

Dear all, I am using SSE quantum Monte Carlo to study Bose-Hubbard model on honeycomb lattice. Honeycomb lattice has a two-site unit cell. Alps output the average density. I wonder whether the average on each sublattice can be measured and how to do that? Sincerely, Huaiming

2 1

mps_optim correlation measurement time
by Mateusz Łącki 15 Jan '17

15 Jan '17

Dear All, I am trying to compute properties of a quantum ising model in the transverse field. I want to measure local magnetization (both transverse and along the field), and nearest neighbor correlations Sx(i) Sx(i+1) and Sz(i) Sz(i+1) for each two nearest neighbours. Later I plan on adding additional terms, but below I present the minimum model representing the problems. For longer lattices however over 90% cpu time (tens of minutes, hours) is spent in measurement of the correlation functions. Am I doing something wrong? Best, Mateusz Łącki My input file is as follows: LATTICE="open chain lattice" MODEL=“spin" J=1 SWEEPS=10 chkp_each=10 deleteafteruse=0 MEASURE_LOCAL[Local magnetization X]=Sx MEASURE_LOCAL[Local magnetization Z]=Sz MEASURE_LOCAL_AT[SzSz] = "Sz:Sz|(0, 1),(1, 2),(2, 3),(3, 4),(4, 5),(5, 6),(6, 7),(7, 8),(8, 9),(9, 10),(10, 11),(11, 12),(12, 13),(13, 14),(14, 15),(15, 16),(16, 17),(17, 18),(18, 19),(19, 20),(20, 21),(21, 22),(22, 23),(23, 24),(24, 25),(25, 26),(26, 27),(27, 28),(28, 29),(29, 30),(30, 31),(31, 32),(32, 33),(33, 34),(34, 35),(35, 36),(36, 37),(37, 38),(38, 39),(39, 40),(40, 41),(41, 42),(42, 43),(43, 44),(44, 45),(45, 46),(46, 47),(47, 48),(48, 49),(49, 50),(50, 51),(51, 52),(52, 53),(53, 54),(54, 55),(55, 56),(56, 57),(57, 58),(58, 59),(59, 60),(60, 61),(61, 62),(62, 63),(63, 64),(64, 65),(65, 66),(66, 67),(67, 68),(68, 69),(69, 70),(70, 71),(71, 72),(72, 73),(73, 74),(74, 75),(75, 76),(76, 77),(77, 78),(78, 79),(79, 80),(80, 81),(81, 82),(82, 83),(83, 84),(84, 85),(85, 86),(86, 87),(87, 88),(88, 89),(89, 90),(90, 91),(91, 92),(92, 93),(93, 94),(94, 95),(95, 96),(96, 97),(97, 98),(98, 99),(99, 100),(100, 101),(101, 102),(102, 103),(103, 104),(104, 105),(105, 106),(106, 107),(107, 108),(108, 109),(109, 110),(110, 111),(111, 112),(112, 113),(113, 114),(114, 115),(115, 116),(116, 117),(117, 118),(118, 119),(119, 120),(120, 121),(121, 122),(122, 123),(123, 124),(124, 125),(125, 126),(126, 127) “ MEASURE_LOCAL_AT[SpSp] = "Splus:Splus|(0, 1),(1, 2),(2, 3),(3, 4),(4, 5),(5, 6),(6, 7),(7, 8),(8, 9),(9, 10),(10, 11),(11, 12),(12, 13),(13, 14),(14, 15),(15, 16),(16, 17),(17, 18),(18, 19),(19, 20),(20, 21),(21, 22),(22, 23),(23, 24),(24, 25),(25, 26),(26, 27),(27, 28),(28, 29),(29, 30),(30, 31),(31, 32),(32, 33),(33, 34),(34, 35),(35, 36),(36, 37),(37, 38),(38, 39),(39, 40),(40, 41),(41, 42),(42, 43),(43, 44),(44, 45),(45, 46),(46, 47),(47, 48),(48, 49),(49, 50),(50, 51),(51, 52),(52, 53),(53, 54),(54, 55),(55, 56),(56, 57),(57, 58),(58, 59),(59, 60),(60, 61),(61, 62),(62, 63),(63, 64),(64, 65),(65, 66),(66, 67),(67, 68),(68, 69),(69, 70),(70, 71),(71, 72),(72, 73),(73, 74),(74, 75),(75, 76),(76, 77),(77, 78),(78, 79),(79, 80),(80, 81),(81, 82),(82, 83),(83, 84),(84, 85),(85, 86),(86, 87),(87, 88),(88, 89),(89, 90),(90, 91),(91, 92),(92, 93),(93, 94),(94, 95),(95, 96),(96, 97),(97, 98),(98, 99),(99, 100),(100, 101),(101, 102),(102, 103),(103, 104),(104, 105),(105, 106),(106, 107),(107, 108),(108, 109),(109, 110),(110, 111),(111, 112),(112, 113),(113, 114),(114, 115),(115, 116),(116, 117),(117, 118),(118, 119),(119, 120),(120, 121),(121, 122),(122, 123),(123, 124),(124, 125),(125, 126),(126, 127) “ MEASURE_LOCAL_AT[SmSp] = "Sminus:Splus|(0, 1),(1, 2),(2, 3),(3, 4),(4, 5),(5, 6),(6, 7),(7, 8),(8, 9),(9, 10),(10, 11),(11, 12),(12, 13),(13, 14),(14, 15),(15, 16),(16, 17),(17, 18),(18, 19),(19, 20),(20, 21),(21, 22),(22, 23),(23, 24),(24, 25),(25, 26),(26, 27),(27, 28),(28, 29),(29, 30),(30, 31),(31, 32),(32, 33),(33, 34),(34, 35),(35, 36),(36, 37),(37, 38),(38, 39),(39, 40),(40, 41),(41, 42),(42, 43),(43, 44),(44, 45),(45, 46),(46, 47),(47, 48),(48, 49),(49, 50),(50, 51),(51, 52),(52, 53),(53, 54),(54, 55),(55, 56),(56, 57),(57, 58),(58, 59),(59, 60),(60, 61),(61, 62),(62, 63),(63, 64),(64, 65),(65, 66),(66, 67),(67, 68),(68, 69),(69, 70),(70, 71),(71, 72),(72, 73),(73, 74),(74, 75),(75, 76),(76, 77),(77, 78),(78, 79),(79, 80),(80, 81),(81, 82),(82, 83),(83, 84),(84, 85),(85, 86),(86, 87),(87, 88),(88, 89),(89, 90),(90, 91),(91, 92),(92, 93),(93, 94),(94, 95),(95, 96),(96, 97),(97, 98),(98, 99),(99, 100),(100, 101),(101, 102),(102, 103),(103, 104),(104, 105),(105, 106),(106, 107),(107, 108),(108, 109),(109, 110),(110, 111),(111, 112),(112, 113),(113, 114),(114, 115),(115, 116),(116, 117),(117, 118),(118, 119),(119, 120),(120, 121),(121, 122),(122, 123),(123, 124),(124, 125),(125, 126),(126, 127) “ MEASURE_LOCAL_AT[SpSm] = "Splus:Sminus|(0, 1),(1, 2),(2, 3),(3, 4),(4, 5),(5, 6),(6, 7),(7, 8),(8, 9),(9, 10),(10, 11),(11, 12),(12, 13),(13, 14),(14, 15),(15, 16),(16, 17),(17, 18),(18, 19),(19, 20),(20, 21),(21, 22),(22, 23),(23, 24),(24, 25),(25, 26),(26, 27),(27, 28),(28, 29),(29, 30),(30, 31),(31, 32),(32, 33),(33, 34),(34, 35),(35, 36),(36, 37),(37, 38),(38, 39),(39, 40),(40, 41),(41, 42),(42, 43),(43, 44),(44, 45),(45, 46),(46, 47),(47, 48),(48, 49),(49, 50),(50, 51),(51, 52),(52, 53),(53, 54),(54, 55),(55, 56),(56, 57),(57, 58),(58, 59),(59, 60),(60, 61),(61, 62),(62, 63),(63, 64),(64, 65),(65, 66),(66, 67),(67, 68),(68, 69),(69, 70),(70, 71),(71, 72),(72, 73),(73, 74),(74, 75),(75, 76),(76, 77),(77, 78),(78, 79),(79, 80),(80, 81),(81, 82),(82, 83),(83, 84),(84, 85),(85, 86),(86, 87),(87, 88),(88, 89),(89, 90),(90, 91),(91, 92),(92, 93),(93, 94),(94, 95),(95, 96),(96, 97),(97, 98),(98, 99),(99, 100),(100, 101),(101, 102),(102, 103),(103, 104),(104, 105),(105, 106),(106, 107),(107, 108),(108, 109),(109, 110),(110, 111),(111, 112),(112, 113),(113, 114),(114, 115),(115, 116),(116, 117),(117, 118),(118, 119),(119, 120),(120, 121),(121, 122),(122, 123),(123, 124),(124, 125),(125, 126),(126, 127) “ MEASURE_LOCAL_AT[SmSm] = "Sminus:Sminus|(0, 1),(1, 2),(2, 3),(3, 4),(4, 5),(5, 6),(6, 7),(7, 8),(8, 9),(9, 10),(10, 11),(11, 12),(12, 13),(13, 14),(14, 15),(15, 16),(16, 17),(17, 18),(18, 19),(19, 20),(20, 21),(21, 22),(22, 23),(23, 24),(24, 25),(25, 26),(26, 27),(27, 28),(28, 29),(29, 30),(30, 31),(31, 32),(32, 33),(33, 34),(34, 35),(35, 36),(36, 37),(37, 38),(38, 39),(39, 40),(40, 41),(41, 42),(42, 43),(43, 44),(44, 45),(45, 46),(46, 47),(47, 48),(48, 49),(49, 50),(50, 51),(51, 52),(52, 53),(53, 54),(54, 55),(55, 56),(56, 57),(57, 58),(58, 59),(59, 60),(60, 61),(61, 62),(62, 63),(63, 64),(64, 65),(65, 66),(66, 67),(67, 68),(68, 69),(69, 70),(70, 71),(71, 72),(72, 73),(73, 74),(74, 75),(75, 76),(76, 77),(77, 78),(78, 79),(79, 80),(80, 81),(81, 82),(82, 83),(83, 84),(84, 85),(85, 86),(86, 87),(87, 88),(88, 89),(89, 90),(90, 91),(91, 92),(92, 93),(93, 94),(94, 95),(95, 96),(96, 97),(97, 98),(98, 99),(99, 100),(100, 101),(101, 102),(102, 103),(103, 104),(104, 105),(105, 106),(106, 107),(107, 108),(108, 109),(109, 110),(110, 111),(111, 112),(112, 113),(113, 114),(114, 115),(115, 116),(116, 117),(117, 118),(118, 119),(119, 120),(120, 121),(121, 122),(122, 123),(123, 124),(124, 125),(125, 126),(126, 127) " L=128; MAXSTATES=200; NUMBER_EIGENVALUES=1; {h=1;}

2 1

DMRG application does not run
by Axel Gagge 10 Jan '17

10 Jan '17

?Hello! I'm running the ALPS docker container with IPython support (I have the last version of the container): docker run -p 8888:8888 dolfim/alps:2.2b4-notebook I am trying to run the first example from the DMRG tutorial (http://alps.comp-phys.org/mediawiki/index.php/ALPS_2_Tutorials:DMRG-01_DMRG) but I encounter a problem related to the lines of the code which runs, writes and reads the simulation data (script at http://alps.comp-phys.org/static/tutorials2.2.0/dmrg-01-dmrg/spin_one_half.…)<http://alps.comp-phys.org/static/tutorials2.2.0/dmrg-01-dmrg/spin_one_half.…>?. The script creates input files and task, but nothing more seems to happen and when trying to retrieve the output, there is just an empty list and thus I get an IndexError. Has anyone else encountered this problem? It should be reproducible with the Docker container. Terminal output provided below. Thanks, /Axel Gagge PhD Student Stockholm University alps@a6d9e036c68e:~/work$ alpspython spin_one-half.py dmrg parm_spin_one_half.in.xml --write-xml ALPS DMRG temporary files will be written to . ALPS/dmrg version 1.0.0 (2006/10/02) Density Matrix Renormalization Group algorithm for low-dimensional interacting systems. available from http://alps.comp-phys.org/ copyright (c) 2006-2013 by Adrian E. Feiguin for details see the publication: A.F. Albuquerque et al., J. of Magn. and Magn. Materials 310, 1187 (2007). using the ALPS parallelizing scheduler copyright (c) 1994-2006 by Matthias Troyer <troyer(a)comp-phys.org>. see Lecture Notes in Computer Science, Vol. 1505, p. 191 (1998). based on the ALPS libraries version 2.2.b4 available from http://alps.comp-phys.org/ copyright (c) 1994-2013 by the ALPS collaboration. Consult the web page for license details. For details see the publication: B. Bauer et al., J. Stat. Mech. (2011) P05001. locale::facet::_S_create_c_locale name not valid Traceback (most recent call last): File "spin_one-half.py", line 54, in <module> for s in data[0]: IndexError: list index out of range

2 5

MPS MPI
by Mateusz Łącki 07 Jan '17

07 Jan '17

Dear All I would like to ask if there is a way to run mps_optim simulation with many tasks with MPI. I expect that the DMRG/MPS algorithms are perhaps parallelizable only by openMP, but if a input file contains many tasks then tasks could be executed in parallel, as they process independent input files, and write to independent output files. However it seems that this functionality is not implemented. Am I right? Best, Mateusz Łącki

2 1

Converting observables to traditional units
by Dave Maren 19 Dec '16

19 Dec '16

Dear alps users and developers, I recently installed the ALPS libraries without any problem in Debian 8.6. Following the tutorials in the wiki page I’ve been able to create my own lattices and running some example simulations. Right now, I’m studying a system (Classic Monte Carlo) that has two types of spins under the presence of an external magnetic field, the Hamiltonian is like : J1*(S1i * S1j) + J2*(S2i * S2j) + J12*(S1i * S2j) + (Zeeman) For what I’ve been reading in the help page and forum, all observables calculated in terms of energy units. Can someone explain me how convert all the quantities to traditional units like Kelvin, Tesla, etc...? I have the magnetization, specific heat and connected susceptibility for a wide range of different J1, J2 and J12 couplings and external fields. I looked in previous post and information in the wiki page without success. I hope you can help me, I would really appreciate. Thanks, Dave

1 0

Installation problem of alps-2.2 version in Ubuntu
by Santu Baidya 15 Dec '16

15 Dec '16

Dear alps users, I am currently installing alps-2.2.b3-r7462-src-with-boost in Linux, 4.4.0-47-generic #68-Ubuntu, x86_64, GNU/Linux. I first followed the instruction and ran the command: cmake -D Boost_ROOT_DIR=/opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost -DCMAKE_INSTALL_PREFIX=/opt/alps-2.2 /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/alps It ran without any problem.After that when I ran make i got some error for installation: /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/boost/atomic/atomic.hpp:202:16: error: ‘uintptr_t’ was not declared in this scope typedef atomic<uintptr_t> atomic_uintptr_t; ^ /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/boost/atomic/atomic.hpp:202:25: error: template argument 1 is invalid typedef atomic<uintptr_t> atomic_uintptr_t; ^In file included from /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/boost/thread/once.hpp:20:0, from /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/libs/thread/src/pthread/./once_atomic.cpp:9, from /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/libs/thread/src/pthread/once.cpp:8: /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/boost/thread/pthread/once_atomic.hpp:120:37: warning: variadic templates only available with -std=c++11 or -std=gnu++11 template<typename Function, class ...ArgTypes> ^ /opt/alps-2.2/alps-2.2.b3-r7462-src-with-boost/boost/boost/thread/pthread/once_atomic.hpp:121:108: warning: variadic templates only available with -std=c++11 or -std=gnu++11 inline void call_once(once_flag& flag, BOOST_THREAD_RV_REF(Function) f, BOOST_THREAD_RV_REF(ArgTypes)... args) ^ src/boost/CMakeFiles/boost.dir/build.make:3302: recipe for target 'src/boost/CMakeFiles/boost.dir/__/__/boost/libs/thread/src/pthread/once.cpp.o' failedmake[2]: *** [src/boost/CMakeFiles/boost.dir/__/__/boost/libs/thread/src/pthread/once.cpp.o] Error 1CMakeFiles/Makefile2:1081: recipe for target 'src/boost/CMakeFiles/boost.dir/all' failedmake[1]: *** [src/boost/CMakeFiles/boost.dir/all] Error 2Makefile:160: recipe for target 'all' failedmake: *** [all] Error 2 Please help me to install this code in Ubuntu in my pc. Thanking you, Dr. Santu BaidyaSeoul National UniversitySouth korea

5 11

Problems with recent HDF5 1.10.0
by Michele Dolfi 09 Dec '16

09 Dec '16

Dear all, We recently found a bug in the new version of HDF5 1.10.0. Among others, the HDF5 library will abort while reading some data before the (alps) archive has been closed and sometimes it will fail to overwrite in a dataset that already exists. We noticed that the pyalps test pyhdf5.py is affected but this, as well as some routine in the saving of ALPS.Alea results (for an example, just run the tutorial mc-01). Jan Gukelberger reported the bug and a patch to the HDF Group and we hope this could quickly be incorporated in the next release. For the moment we highly recommend to use the version 1.8.x of HDF5. Best regards, Michele -- ETH Zurich Dr. Michele Dolfi Institute for Theoretical Physics HIT G 32.4 Wolfgang-Pauli-Str. 27 8093 Zurich Switzerland dolfim(a)phys.ethz.ch www.itp.phys.ethz.ch +41 44 633 78 56 phone +41 44 633 11 15 fax

1 0

Distributed diagonalization
by Brandt, Benedikt B 08 Dec '16

08 Dec '16

Hi all Has there ever been any attempt to write an extension of the sparse-diagonalization code that allows the matrix to be stored across multiple machines? In other words so that one can use the combined processing power and storage of multiple nodes in a cluster? If I see it correctly, alps can use MPI but doesn't share resources across nodes. Is that correct? Thanks Benedikt

3 3

vistrails - package org.comp-phys.alps (version 2.2.1) is out of date
by Brandt, Benedikt B 02 Dec '16

02 Dec '16

Dear alps community I succesfully compiled and installed alps from SVN (revision 7792) on ubuntu 16.04. However when I try to open a .vt file in vistrails 2.2.4 I get the following error: "Module Tools|MplXYPlotCell in package org.comp-phys.alps (version 2.2.1) is out of date. Please check with the package developer for a new version" Is there a specific version of vistrails that I need to use? Thanks Benedikt

2 2

Trouble installing ALPS with VisTrails on Win 7
by De Nicola, Stefano 15 Nov '16

15 Nov '16

Dear all, I'm having trouble installing ALPS and VisTrails on Win7. Here is a detailed list of what I did and what didn't work: Installed VisTrails 2.2.4 from https://www.vistrails.org/index.php/Downloads Installed ALPS2.2b3 binary from http://alps.comp-phys.org/mediawiki/index.php/Download_and_install_ALPS_2 Installed ALPS-vistrails-2.2.b3 binary from http://alps.comp-phys.org/mediawiki/index.php/Download_and_install_ALPS_2 Added ALPS to environment variables from control panel (it wasn't possible to do it directly during installation, the installer complained about the "path being too long") as : Variable Name: ALPS Variable value: C:\Program Files\ALPS\bin Opened C:\Program Files\ALPS\tutorials\intro-01-basics with vistrails The program seems to initialize correctly, then I get: Critical error: error changing version (I get this message twice) The full error message reads: InvalidPipeline: Pipeline has errors. Please see the detailed message for more information. Missing package: org.comp-phys.alps If, within vistrails, I try to enable ALPS from preferences/packages, get: Initialization of package "ALPS" failed. The full error message reads: InitializationFailed: Package 'ALPS' failed to initialize because of the following exceptions: Traceback (most recent call last): File "C:\Program Files\VisTrails\vistrails\core\modules\module_registry.py", line 1635, in initialize_package package.initialize() File "C:\Program Files\VisTrails\vistrails\core\modules\package.py", line 429, in initialize __import__(name, globals(), locals(), []) File "C:\Program Files\VisTrails\vistrails\core\packagemanager.py", line 266, in _import_override package_importing_directly=False) File "C:\Program Files\VisTrails\vistrails\core\modules\package.py", line 310, in import_override res = orig_import(name, globals, locals, fromlist, level) File "C:\Program Files\VisTrails\vistrails\packages\alps\init.py", line 22, in <module> import applications File "C:\Program Files\VisTrails\vistrails\core\packagemanager.py", line 257, in _import_override package_importing_directly=True) File "C:\Program Files\VisTrails\vistrails\core\modules\package.py", line 310, in import_override res = orig_import(name, globals, locals, fromlist, level) File "C:\Program Files\VisTrails\vistrails\packages\alps\applications.py", line 19, in <module> import tools File "C:\Program Files\VisTrails\vistrails\core\packagemanager.py", line 257, in _import_override package_importing_directly=True) File "C:\Program Files\VisTrails\vistrails\core\modules\package.py", line 310, in import_override res = orig_import(name, globals, locals, fromlist, level) File "C:\Program Files\VisTrails\vistrails\packages\alps\tools.py", line 18, in <module> from packages.HTTP.init import HTTPFile File "C:\Program Files\VisTrails\vistrails\core\packagemanager.py", line 257, in _import_override package_importing_directly=True) File "C:\Program Files\VisTrails\vistrails\core\modules\package.py", line 331, in import_override res = orig_import(name, globals, locals, fromlist, level) ImportError: No module named HTTP.init Time: 2016-11-15 10:03:15,427 Location: C:\Program Files\VisTrails\vistrails\gui\preferences.py, line 326 Thank you in advance, kind regards Stefano

2 2