- Comp-phys-alps-users - lists.phys.ethz.ch

Run-time errors in simple_dmrg
by Christopher Dawson 18 Jan '07

18 Jan '07

Hi there, I recently compiled alps-1.3b3 (and the applications) with boost version 1.33.1. On running simple_dmrg < parm1, as in the tutorial, I get the following error EXCEPTION: bad lexical cast: source type value could not be interpreted as target I can't figure out where this exception is being thrown, has anyone experienced this error before? Kind regards. Chris

1 0

Fwd: Uncaught bounce notification
by Matthias Troyer 18 Jan '07

18 Jan '07

Begin forwarded message: > From: mailman-bounces(a)phys.ethz.ch > Date: January 17, 2007 9:08:59 AM GMT+01:00 > To: comp-phys-alps-users-owner(a)phys.ethz.ch > Subject: Uncaught bounce notification > > The attached message was received as a bounce, but either the bounce > format was not recognized, or no member addresses could be extracted > from it. This mailing list has been configured to send all > unrecognized bounce messages to the list administrator(s). > > For more information see: > https://webmail.phys.ethz.ch/mailman/admin/comp-phys-alps-users/bounce > > > From: Javier Vijande <javier.vijande(a)uv.es> > Date: January 17, 2007 9:09:48 AM GMT+01:00 > To: comp-phys-alps-users-bounces(a)phys.ethz.ch > Subject: A question about installing the libraries. > Reply-To: javier.vijande(a)uv.es > > > Hi. > > I am trying to compile for the first time the libraries and program of > ALPS, so probably this is a very silly question. I am having > difficulties making the program to recognize the BLAS and LAPACK > libraries. > > I install the BLAS and LAPACK libraries that are in > > http://www.netlib.org/blas/ > http://www.netlib.org/lapack/ > > These are f77 libraries I normally use, so I am quite sure they are > properly installed (at least they never were a problem until now). > > After they are installed I copy the .a file into the usual /usr/lib > and > also to be sure into the ~/home/vijande/ALPS/lib folder and I try to > make the instalation of the .configure tool of the instalation with > the > following options: > > ./configure --prefix=/home/vijande/ALPS > --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 > --with-blas-lib=/home/vijande/ALPS/lib > --with-blas=-lblas > --with-lapack-dir=/home/vijande/ALPS/lib > --with-lapack=-llapack > > and I obtain the following error message: > > configure: checking for ESSL on IBM AIX > checking for dgemm_ in -lessl... no > configure: checking for ATLAS Library > checking for dgemm_ in -latlas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -latlas... no > checking for dgemm_ in -L/usr/local/lib -latlas... no > checking for dgemm_ in -lf77blas -latlas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas - > latlas... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas... no > checking for dgemm_ in -lf77blas -latlas -lg2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas > -lg2c... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lg2c... no > checking for dgemm_ in -lf77blas -latlas -lI77 -lF77... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas - > lI77 > -lF77... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lI77 - > lF77... > no > configure: checking for BLAS Library > checking for dgemm_ in -lblas... no > checking for dgemm_ in -lblas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas... no > checking for dgemm_ in -L/usr/local/lib -lblas... no > checking for dgemm_ in -lblas -lf2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lf2c... no > checking for dgemm_ in -L/usr/local/lib -lblas -lf2c... no > checking for dgemm_ in -lblas -lg2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lg2c... no > checking for dgemm_ in -L/usr/local/lib -lblas -lg2c... no > checking for dgemm_ in -lblas -lpgftnrtl -lpgc... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lpgftnrtl > -lpgc... no > checking for dgemm_ in -L/usr/local/lib -lblas -lpgftnrtl -lpgc... no > configure: disabling BLAS support > configure: disabling LAPACK support > configure: LAPACK library not found. diag/fulldiag will not be built. > configure: LAPACK library not found. diag/sparsediag will not be > built. > configure: LAPACK library not found. dmrg/particle_in_box will not be > built. > configure: LAPACK library not found. dmrg/interacting will not be > built. > configure: LAPACK library not found. qmc/looper will not be built. > > I tried also with > > ./configure --prefix=/home/vijande/ALPS > --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 > > but the results are identical. > > Any idea what I am doing wrong? > > Thanks in advance. > > -- > Javier Vijande Asenjo > > javier.vijande(a)uv.es > Departamento de Fisica Teorica > Universidad de Valencia > > >

2 1

A question about installing the libraries.
by Javier Vijande 15 Jan '07

15 Jan '07

Hi. I am trying to compile for the first time the libraries and program of ALPS, so probably this is a very silly question. I am having difficulties making the program to recognize the BLAS and LAPACK libraries. I install the BLAS and LAPACK libraries that are in http://www.netlib.org/blas/ http://www.netlib.org/lapack/ These are f77 libraries I normally use, so I am quite sure they are properly installed (at least they never were a problem until now). After they are installed I copy the .a file into the usual /usr/lib and also to be sure into the ~/home/vijande/ALPS/lib folder and I try to make the instalation of the .configure tool of the instalation with the following options: ./configure --prefix=/home/vijande/ALPS --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 --with-blas-lib=/home/vijande/ALPS/lib --with-blas=-lblas --with-lapack-dir=/home/vijande/ALPS/lib --with-lapack=-llapack and I obtain the following error message: configure: checking for ESSL on IBM AIX checking for dgemm_ in -lessl... no configure: checking for ATLAS Library checking for dgemm_ in -latlas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -latlas... no checking for dgemm_ in -L/usr/local/lib -latlas... no checking for dgemm_ in -lf77blas -latlas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas... no checking for dgemm_ in -lf77blas -latlas -lg2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas -lg2c... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lg2c... no checking for dgemm_ in -lf77blas -latlas -lI77 -lF77... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas -lI77 -lF77... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lI77 -lF77... no configure: checking for BLAS Library checking for dgemm_ in -lblas... no checking for dgemm_ in -lblas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas... no checking for dgemm_ in -L/usr/local/lib -lblas... no checking for dgemm_ in -lblas -lf2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lf2c... no checking for dgemm_ in -L/usr/local/lib -lblas -lf2c... no checking for dgemm_ in -lblas -lg2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lg2c... no checking for dgemm_ in -L/usr/local/lib -lblas -lg2c... no checking for dgemm_ in -lblas -lpgftnrtl -lpgc... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lpgftnrtl -lpgc... no checking for dgemm_ in -L/usr/local/lib -lblas -lpgftnrtl -lpgc... no configure: disabling BLAS support configure: disabling LAPACK support configure: LAPACK library not found. diag/fulldiag will not be built. configure: LAPACK library not found. diag/sparsediag will not be built. configure: LAPACK library not found. dmrg/particle_in_box will not be built. configure: LAPACK library not found. dmrg/interacting will not be built. configure: LAPACK library not found. qmc/looper will not be built. I tried also with ./configure --prefix=/home/vijande/ALPS --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 but the results are identical. Any idea what I am doing wrong? Thanks in advance. -- Javier Vijande Asenjo javier.vijande(a)uv.es Departamento de Fisica Teorica Universidad de Valencia

1 0

Re: [ALPS-users] Question about failed tests (example3, example4, example8) (Synge Todo)
by Harald Jeschke 09 Jan '07

09 Jan '07

Dear Synge, > I have encountered the same test failures when I used boost-1_33_1 on > my x86_64 box (CentOS 4.3, kernel 2.6.9, icc 9.1.045). Please try a > newer version of boost, i.e. RC_1_34_0 or CVS HEAD. Recent snapshots > are available from http://looper.t.u-tokyo.ac.jp/alps-jp/download/boost. thank you very much for your advice. Recompiling with boost-RC_1_34_0 resolved all test failures. Best regards, Harald.

1 0

make install for ALPS-1.3b3
by Austen Lamacraft 09 Jan '07

09 Jan '07

I'm having trouble with make install for ALPS-1.3b3. I'm running OS X 10.4.8 on a PowerPC Powerbook. ALPS is in HOME/alps-1.3b3. Boost (version 1.33.1) is in HOME/ alps-1.3b3/boost. I run ./configure --prefix=$HOME/alps-1.3b3 make successfully, but make install exits with test -z "/Users/austen/alps-1.3b3/lib/xml" || /bin/sh ../../config/ mkinstalldirs "/Users/austen/alps-1.3b3/lib/xml" /usr/bin/install -c -m 644 'archive2plot.xsl' '/Users/austen/ alps-1.3b3/lib/xml/archive2plot.xsl' install: archive2plot.xsl and /Users/austen/alps-1.3b3/lib/xml/ archive2plot.xsl are the same file /usr/bin/install -c -m 644 'helpers.xsl' '/Users/austen/alps-1.3b3/ lib/xml/helpers.xsl' install: helpers.xsl and /Users/austen/alps-1.3b3/lib/xml/helpers.xsl are the same file /usr/bin/install -c -m 644 'plot2gp.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2gp.xsl' install: plot2gp.xsl and /Users/austen/alps-1.3b3/lib/xml/plot2gp.xsl are the same file /usr/bin/install -c -m 644 'plot2html.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2html.xsl' install: plot2html.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2html.xsl are the same file /usr/bin/install -c -m 644 'plot2text.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2text.xsl' install: plot2text.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2text.xsl are the same file /usr/bin/install -c -m 644 'plot2xmgr.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2xmgr.xsl' install: plot2xmgr.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2xmgr.xsl are the same file /usr/bin/install -c -m 644 'QMCXML2text.xsl' '/Users/austen/ alps-1.3b3/lib/xml/QMCXML2text.xsl' install: QMCXML2text.xsl and /Users/austen/alps-1.3b3/lib/xml/ QMCXML2text.xsl are the same file /usr/bin/install -c -m 644 'ALPS.xsl' '/Users/austen/alps-1.3b3/lib/ xml/ALPS.xsl' install: ALPS.xsl and /Users/austen/alps-1.3b3/lib/xml/ALPS.xsl are the same file /usr/bin/install -c -m 644 'job.xsl' '/Users/austen/alps-1.3b3/lib/ xml/job.xsl' install: job.xsl and /Users/austen/alps-1.3b3/lib/xml/job.xsl are the same file make[3]: *** [install-dist_pkgdataDATA] Error 64 make[2]: *** [install-am] Error 2 make[1]: *** [install-recursive] Error 1 make: *** [install-recursive] Error 1 Any ideas? Austen

2 1

Question about failed tests (example3, example4, example8)
by Harald Jeschke 09 Jan '07

09 Jan '07

Dear ALPS users, I'm trying to get started with ALPS, and I would like to ask if you have a suggestion concerning the following two test failures I encountered. I have a hunch they may be related to my particular choice of Linux/Compilers but maybe you have seen them before. My setup: $ more /etc/fedora-release Fedora Core release 5 (Bordeaux) $ uname -a Linux caiman 2.6.15-1.2054_FC5 #1 SMP Tue Mar 14 15:48:20 EST 2006 x86_64 x86_64 x86_64 GNU/Linux $ which icc /opt/intel/cce/9.1.044/bin/icc $ ls -l /opt/intel/mkl/8.1.1/lib/em64t/libmkl_lapack.a -r--r--r-- 1 root root 14955956 Aug 11 08:34 /opt/intel/mkl/8.1.1/lib/em64t/libmkl_lapack.a Now I get the following: $ cd ./alps-1.3b3/test/model/ $ ./example3 HHardcoreBosonSite = *** glibc detected *** /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3: double free or corruption (out): 0x00002ab9377db010 *** ======= Backtrace: ========= /lib64/libc.so.6[0x3af126d7a3] /lib64/libc.so.6(__libc_free+0x84)[0x3af126d924] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3[0x421c2e] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3(__gxx_personality_v0+0x2a4)[0x41129c] /lib64/libc.so.6(__libc_start_main+0xf4)[0x3af121d084] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3(_ZNSt8ios_base4InitD1Ev+0x41)[0x411099] ======= Memory map: ======== [if helpful I can send the memory map also.] I compiled a version of example3 with -g and ran it in idb; I then get a signal SEGV in /home/jeschke/alps-1.3b3/src/alps/model/siteoperator.h line 180 mat[i][j].second=false; with i=1 and j=32781 which is called from the same file, line 130 boost::multi_array<T,2> matrix(boost::extents[f_matrix.shape()[0]][f_matrix.shape()[1]]); which is called from example3.C line 50 std::cout << "HHardcoreBosonSite =\n" << alps::get_matrix(Expression_(),lib.get_hamiltonian("hardcore boson",p,true).site_term(), lib.get_hamiltonian("hardcore boson").basis().site_basis()) << "\n"; The other problem (identical for example4 and example8): $ ./example4 HHardcoreBoson = Caught exception: St9bad_alloc This seems to occur in example4.C line 79 std::cout << "HHardcoreBoson = \n" << bondmatrix(lib,"hardcore boson") << "\n\n"; but I haven't been able to trace it further. Best regards, Harald Jeschke. --------------------------------------------------------------------- Dr. Harald O. Jeschke | Email: jeschke(a)itp.uni-frankfurt.de | http://www.itp.uni-frankfurt.de/~jeschke/ --------------------------------------------------------------------- Head of Emmy Noether Junior Research Group | Institut fuer theoretische Physik | Phone: +49-69-798-47827 Johann Wolfgang Goethe-Universitaet | FAX: +49-69-798-47832 Max-von-Laue-Strasse 1 | 60438 Frankfurt/Main, GERMANY | ---------------------------------------------------------------------

2 1

ALPS 1.3b3 beta release
by Matthias Troyer 19 Dec '06

19 Dec '06

Dear all, we posted a new beta release of ALPS 1.3. The new beta version contains - support for Cygwin under Windows - thanks to Andreas Läuchli - implementation of measurements in the DMRG code - thanks to Adrian Feiguin Please send any problems encountered while installing or running ALPS to the user's mailing list and report any bug using the Bugzilla system on the web page. ALPS 1.3 is now essentially feature-complete and we will update the documentation and wait for bug reports before finalizing the release. Matthias

1 0

Plot file problems
by Austen Lamacraft 06 Dec '06

06 Dec '06

An elementary question from a beginner user... I can't get the simplest plot file examples given in the ToolsHOWTO or Tutorial:ClassicalMCSimulations to work. While extracttext, extractxmgr and direct evaluation using xsltproc all work without complaining , no points are extracted e.g. from the task files produced by the one-dimensional Heisenberg simulation in Tutorial:ClassicalMCSimulations. Thus although the plots produced by extractxmgr plot.xml parm2a.task*.out.xml > result.xmgr are correctly labeled, there are no points. Any ideas? Thanks, Austen

3 15

Hamiltonian Matrix Elements
by Jeff Hammond 04 Dec '06

04 Dec '06

Dear ALPS friends, I'm trying to generate Hamiltonian matrix elements for lattice models using the kitchen sink of symmetries in ALPS. Unfortunately, I can't figure out where I can get them by reading the source code. Specifically, I'm looking for the quantity M(i,j,k,l) which defines the Hamiltonian H = sum(i,j,k,l) M(i,j,k,l) c(i)+ c(j)+ c(l) c(k). I doubt it is ever stored complete in memory, but I just want to read it out element-by-element in sparse format into an external file. If no part of this quantity ever exists but can be obtained by some modifying the code, that works, too. If someone can point me to the right place and make a suggestion for what to do, that would be fantastic. If this is not a simple request at all, but someone still wants to help me, I can give a much more detailed explanation of what I'm trying to do. Jeff Hammond The University of Chicago

2 2

Differences between ALPS 1.2.2 and 1.3.2 (TOTAL_MOMENTUM, ...)
by Cristian Degli Esposti Boschi 03 Dec '06

03 Dec '06

I recently installed ALPS (lib+apps), release version 1.2.2 and played a while also with a Live CD shipped with 1.3.2. Am I right that the tutorial on the web site are referred to the pre-release 1.3 ? In particular, using the same input files, with sparsediag of 1.2.2 I cannot produce any output as far as correlations are concerned while with 1.3.2 I can. What I find misleading is that with 1.2.2 I had no complain message about the parameters MEASURE_CORRELATIONS, that seem to be simply ignored. Well, apart from that, I find the implementation of TOTAL_MOMENTUM very useful (again it seems to be active only with 1.3.2). I wonder if the eigenvalue can be selected from input...how? More generally, which is the syntax to select two or more compatible quantum numbers? CONSERVED_QUANTUMNUMBERS="???"; I'm sorry but I couldn't find this last point on the wiki pages. Cheers, Cristian -- ___________________________________________________ Cristian Degli Esposti Boschi CNR-INFM, Unita' di Ricerca CNISM di Bologna, c/o Dipartimento di Fisica, Universita' di Bologna viale Berti-Pichat, 6/2, 40127, Bologna, Italia tel. ++39 051 2095114 fax ++39 051 2095153 e-mail: cristian.degliesposti -AT- unibo.it web: http://www.bo.infm.it/grp/morandi/home.html ___________________________________________________

2 1