Comp-phys-alps-users January 2007

comp-phys-alps-users@lists.phys.ethz.ch

6 participants
6 discussions

Run-time errors in simple_dmrg
by Christopher Dawson 18 Jan '07

18 Jan '07

Hi there, I recently compiled alps-1.3b3 (and the applications) with boost version 1.33.1. On running simple_dmrg < parm1, as in the tutorial, I get the following error EXCEPTION: bad lexical cast: source type value could not be interpreted as target I can't figure out where this exception is being thrown, has anyone experienced this error before? Kind regards. Chris

1 0

Fwd: Uncaught bounce notification
by Matthias Troyer 18 Jan '07

18 Jan '07

Begin forwarded message: > From: mailman-bounces(a)phys.ethz.ch > Date: January 17, 2007 9:08:59 AM GMT+01:00 > To: comp-phys-alps-users-owner(a)phys.ethz.ch > Subject: Uncaught bounce notification > > The attached message was received as a bounce, but either the bounce > format was not recognized, or no member addresses could be extracted > from it. This mailing list has been configured to send all > unrecognized bounce messages to the list administrator(s). > > For more information see: > https://webmail.phys.ethz.ch/mailman/admin/comp-phys-alps-users/bounce > > > From: Javier Vijande <javier.vijande(a)uv.es> > Date: January 17, 2007 9:09:48 AM GMT+01:00 > To: comp-phys-alps-users-bounces(a)phys.ethz.ch > Subject: A question about installing the libraries. > Reply-To: javier.vijande(a)uv.es > > > Hi. > > I am trying to compile for the first time the libraries and program of > ALPS, so probably this is a very silly question. I am having > difficulties making the program to recognize the BLAS and LAPACK > libraries. > > I install the BLAS and LAPACK libraries that are in > > http://www.netlib.org/blas/ > http://www.netlib.org/lapack/ > > These are f77 libraries I normally use, so I am quite sure they are > properly installed (at least they never were a problem until now). > > After they are installed I copy the .a file into the usual /usr/lib > and > also to be sure into the ~/home/vijande/ALPS/lib folder and I try to > make the instalation of the .configure tool of the instalation with > the > following options: > > ./configure --prefix=/home/vijande/ALPS > --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 > --with-blas-lib=/home/vijande/ALPS/lib > --with-blas=-lblas > --with-lapack-dir=/home/vijande/ALPS/lib > --with-lapack=-llapack > > and I obtain the following error message: > > configure: checking for ESSL on IBM AIX > checking for dgemm_ in -lessl... no > configure: checking for ATLAS Library > checking for dgemm_ in -latlas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -latlas... no > checking for dgemm_ in -L/usr/local/lib -latlas... no > checking for dgemm_ in -lf77blas -latlas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas - > latlas... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas... no > checking for dgemm_ in -lf77blas -latlas -lg2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas > -lg2c... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lg2c... no > checking for dgemm_ in -lf77blas -latlas -lI77 -lF77... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas - > lI77 > -lF77... no > checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lI77 - > lF77... > no > configure: checking for BLAS Library > checking for dgemm_ in -lblas... no > checking for dgemm_ in -lblas... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas... no > checking for dgemm_ in -L/usr/local/lib -lblas... no > checking for dgemm_ in -lblas -lf2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lf2c... no > checking for dgemm_ in -L/usr/local/lib -lblas -lf2c... no > checking for dgemm_ in -lblas -lg2c... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lg2c... no > checking for dgemm_ in -L/usr/local/lib -lblas -lg2c... no > checking for dgemm_ in -lblas -lpgftnrtl -lpgc... no > checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lpgftnrtl > -lpgc... no > checking for dgemm_ in -L/usr/local/lib -lblas -lpgftnrtl -lpgc... no > configure: disabling BLAS support > configure: disabling LAPACK support > configure: LAPACK library not found. diag/fulldiag will not be built. > configure: LAPACK library not found. diag/sparsediag will not be > built. > configure: LAPACK library not found. dmrg/particle_in_box will not be > built. > configure: LAPACK library not found. dmrg/interacting will not be > built. > configure: LAPACK library not found. qmc/looper will not be built. > > I tried also with > > ./configure --prefix=/home/vijande/ALPS > --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 > > but the results are identical. > > Any idea what I am doing wrong? > > Thanks in advance. > > -- > Javier Vijande Asenjo > > javier.vijande(a)uv.es > Departamento de Fisica Teorica > Universidad de Valencia > > >

2 1

A question about installing the libraries.
by Javier Vijande 15 Jan '07

15 Jan '07

Hi. I am trying to compile for the first time the libraries and program of ALPS, so probably this is a very silly question. I am having difficulties making the program to recognize the BLAS and LAPACK libraries. I install the BLAS and LAPACK libraries that are in http://www.netlib.org/blas/ http://www.netlib.org/lapack/ These are f77 libraries I normally use, so I am quite sure they are properly installed (at least they never were a problem until now). After they are installed I copy the .a file into the usual /usr/lib and also to be sure into the ~/home/vijande/ALPS/lib folder and I try to make the instalation of the .configure tool of the instalation with the following options: ./configure --prefix=/home/vijande/ALPS --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 --with-blas-lib=/home/vijande/ALPS/lib --with-blas=-lblas --with-lapack-dir=/home/vijande/ALPS/lib --with-lapack=-llapack and I obtain the following error message: configure: checking for ESSL on IBM AIX checking for dgemm_ in -lessl... no configure: checking for ATLAS Library checking for dgemm_ in -latlas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -latlas... no checking for dgemm_ in -L/usr/local/lib -latlas... no checking for dgemm_ in -lf77blas -latlas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas... no checking for dgemm_ in -lf77blas -latlas -lg2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas -lg2c... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lg2c... no checking for dgemm_ in -lf77blas -latlas -lI77 -lF77... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lf77blas -latlas -lI77 -lF77... no checking for dgemm_ in -L/usr/local/lib -lf77blas -latlas -lI77 -lF77... no configure: checking for BLAS Library checking for dgemm_ in -lblas... no checking for dgemm_ in -lblas... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas... no checking for dgemm_ in -L/usr/local/lib -lblas... no checking for dgemm_ in -lblas -lf2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lf2c... no checking for dgemm_ in -L/usr/local/lib -lblas -lf2c... no checking for dgemm_ in -lblas -lg2c... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lg2c... no checking for dgemm_ in -L/usr/local/lib -lblas -lg2c... no checking for dgemm_ in -lblas -lpgftnrtl -lpgc... no checking for dgemm_ in -L/home/vijande/ALPS/lib -lblas -lpgftnrtl -lpgc... no checking for dgemm_ in -L/usr/local/lib -lblas -lpgftnrtl -lpgc... no configure: disabling BLAS support configure: disabling LAPACK support configure: LAPACK library not found. diag/fulldiag will not be built. configure: LAPACK library not found. diag/sparsediag will not be built. configure: LAPACK library not found. dmrg/particle_in_box will not be built. configure: LAPACK library not found. dmrg/interacting will not be built. configure: LAPACK library not found. qmc/looper will not be built. I tried also with ./configure --prefix=/home/vijande/ALPS --with-lp_solve=/home/vijande/Fortran/BEC/lp_solve_4.0 but the results are identical. Any idea what I am doing wrong? Thanks in advance. -- Javier Vijande Asenjo javier.vijande(a)uv.es Departamento de Fisica Teorica Universidad de Valencia

1 0

Re: [ALPS-users] Question about failed tests (example3, example4, example8) (Synge Todo)
by Harald Jeschke 09 Jan '07

09 Jan '07

Dear Synge, > I have encountered the same test failures when I used boost-1_33_1 on > my x86_64 box (CentOS 4.3, kernel 2.6.9, icc 9.1.045). Please try a > newer version of boost, i.e. RC_1_34_0 or CVS HEAD. Recent snapshots > are available from http://looper.t.u-tokyo.ac.jp/alps-jp/download/boost. thank you very much for your advice. Recompiling with boost-RC_1_34_0 resolved all test failures. Best regards, Harald.

1 0

make install for ALPS-1.3b3
by Austen Lamacraft 09 Jan '07

09 Jan '07

I'm having trouble with make install for ALPS-1.3b3. I'm running OS X 10.4.8 on a PowerPC Powerbook. ALPS is in HOME/alps-1.3b3. Boost (version 1.33.1) is in HOME/ alps-1.3b3/boost. I run ./configure --prefix=$HOME/alps-1.3b3 make successfully, but make install exits with test -z "/Users/austen/alps-1.3b3/lib/xml" || /bin/sh ../../config/ mkinstalldirs "/Users/austen/alps-1.3b3/lib/xml" /usr/bin/install -c -m 644 'archive2plot.xsl' '/Users/austen/ alps-1.3b3/lib/xml/archive2plot.xsl' install: archive2plot.xsl and /Users/austen/alps-1.3b3/lib/xml/ archive2plot.xsl are the same file /usr/bin/install -c -m 644 'helpers.xsl' '/Users/austen/alps-1.3b3/ lib/xml/helpers.xsl' install: helpers.xsl and /Users/austen/alps-1.3b3/lib/xml/helpers.xsl are the same file /usr/bin/install -c -m 644 'plot2gp.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2gp.xsl' install: plot2gp.xsl and /Users/austen/alps-1.3b3/lib/xml/plot2gp.xsl are the same file /usr/bin/install -c -m 644 'plot2html.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2html.xsl' install: plot2html.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2html.xsl are the same file /usr/bin/install -c -m 644 'plot2text.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2text.xsl' install: plot2text.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2text.xsl are the same file /usr/bin/install -c -m 644 'plot2xmgr.xsl' '/Users/austen/alps-1.3b3/ lib/xml/plot2xmgr.xsl' install: plot2xmgr.xsl and /Users/austen/alps-1.3b3/lib/xml/ plot2xmgr.xsl are the same file /usr/bin/install -c -m 644 'QMCXML2text.xsl' '/Users/austen/ alps-1.3b3/lib/xml/QMCXML2text.xsl' install: QMCXML2text.xsl and /Users/austen/alps-1.3b3/lib/xml/ QMCXML2text.xsl are the same file /usr/bin/install -c -m 644 'ALPS.xsl' '/Users/austen/alps-1.3b3/lib/ xml/ALPS.xsl' install: ALPS.xsl and /Users/austen/alps-1.3b3/lib/xml/ALPS.xsl are the same file /usr/bin/install -c -m 644 'job.xsl' '/Users/austen/alps-1.3b3/lib/ xml/job.xsl' install: job.xsl and /Users/austen/alps-1.3b3/lib/xml/job.xsl are the same file make[3]: *** [install-dist_pkgdataDATA] Error 64 make[2]: *** [install-am] Error 2 make[1]: *** [install-recursive] Error 1 make: *** [install-recursive] Error 1 Any ideas? Austen

2 1

Question about failed tests (example3, example4, example8)
by Harald Jeschke 09 Jan '07

09 Jan '07

Dear ALPS users, I'm trying to get started with ALPS, and I would like to ask if you have a suggestion concerning the following two test failures I encountered. I have a hunch they may be related to my particular choice of Linux/Compilers but maybe you have seen them before. My setup: $ more /etc/fedora-release Fedora Core release 5 (Bordeaux) $ uname -a Linux caiman 2.6.15-1.2054_FC5 #1 SMP Tue Mar 14 15:48:20 EST 2006 x86_64 x86_64 x86_64 GNU/Linux $ which icc /opt/intel/cce/9.1.044/bin/icc $ ls -l /opt/intel/mkl/8.1.1/lib/em64t/libmkl_lapack.a -r--r--r-- 1 root root 14955956 Aug 11 08:34 /opt/intel/mkl/8.1.1/lib/em64t/libmkl_lapack.a Now I get the following: $ cd ./alps-1.3b3/test/model/ $ ./example3 HHardcoreBosonSite = *** glibc detected *** /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3: double free or corruption (out): 0x00002ab9377db010 *** ======= Backtrace: ========= /lib64/libc.so.6[0x3af126d7a3] /lib64/libc.so.6(__libc_free+0x84)[0x3af126d924] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3[0x421c2e] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3(__gxx_personality_v0+0x2a4)[0x41129c] /lib64/libc.so.6(__libc_start_main+0xf4)[0x3af121d084] /home/jeschke/alps-1.3b3/test/model/.libs/lt-example3(_ZNSt8ios_base4InitD1Ev+0x41)[0x411099] ======= Memory map: ======== [if helpful I can send the memory map also.] I compiled a version of example3 with -g and ran it in idb; I then get a signal SEGV in /home/jeschke/alps-1.3b3/src/alps/model/siteoperator.h line 180 mat[i][j].second=false; with i=1 and j=32781 which is called from the same file, line 130 boost::multi_array<T,2> matrix(boost::extents[f_matrix.shape()[0]][f_matrix.shape()[1]]); which is called from example3.C line 50 std::cout << "HHardcoreBosonSite =\n" << alps::get_matrix(Expression_(),lib.get_hamiltonian("hardcore boson",p,true).site_term(), lib.get_hamiltonian("hardcore boson").basis().site_basis()) << "\n"; The other problem (identical for example4 and example8): $ ./example4 HHardcoreBoson = Caught exception: St9bad_alloc This seems to occur in example4.C line 79 std::cout << "HHardcoreBoson = \n" << bondmatrix(lib,"hardcore boson") << "\n\n"; but I haven't been able to trace it further. Best regards, Harald Jeschke. --------------------------------------------------------------------- Dr. Harald O. Jeschke | Email: jeschke(a)itp.uni-frankfurt.de | http://www.itp.uni-frankfurt.de/~jeschke/ --------------------------------------------------------------------- Head of Emmy Noether Junior Research Group | Institut fuer theoretische Physik | Phone: +49-69-798-47827 Johann Wolfgang Goethe-Universitaet | FAX: +49-69-798-47832 Max-von-Laue-Strasse 1 | 60438 Frankfurt/Main, GERMANY | ---------------------------------------------------------------------

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Comp-phys-alps-users January 2007